Whoever wins... we lose

For the non AVP fans out there, this guy was inspired by #alienvspredator. The 3 red laser dots indicate a predator has his sights focused on the soon to be terminated alien's skull. Yes, those are droplets of drool on the alien's chin. Really happy with the way he turned out. Totally worth 3 hours at the torch. A video of the detail is available to view on instagram @designsbyheathersellers.

Frog Pendant

This little guy has a lovely silver bail from Amanda Muddimer at https://mangobeads.co.uk/.  The perfect finishing touch to secure the pendant. 

Lessons Learned from an Antique Key - Class Notes

Years back, I attempted to create a trapped bead on a key.  Being self taught, the initial project was full of valuable lessons.  Here are a few gems of knowledge for flameworkers attempting to create a trapped bead on an antique key.

Key Jargon for Reference:

 "Bow" - the part of the key a person turns or handles.

"Bit" - the part of the key which operates the lock.

"Shank" - the part of the key connecting the bit and bow.

What to look for when buying a key: 

1. Shank:  The shank design is very important.  A hollow-barrel shank can receive a heavily dipped mandrel.  Try to avoid trapping bubbles in the bead release.  During heating, the trapped air expands and will "blow" the dried release directly out the end of the key barrel.  The sound and blast of hot air is very startling.  I suggest gently warming the barrel and wet bead release during the drying process to let the air expand and bubble out the end of the shank, near the mandrel.   
2. Patina:  The patina helps to indicate the key's make up.  A dark patina usually indicates the key is made from cast iron.  Newer keys made of nickle/zinc alloys are not recommended for flameworking, and can shatter under the intense heat of a torch.
3. Bow:  The bow gives a clue to the age of the key.  Circa 1800-1900, the bow of keys were commonly curved and smooth.  Bows can feature designs such as trifoils, bishop's miters and crosses. 
4. Size:  Smaller keys are easier to balance on a mandrel.  The weight of larger keys can quickly wear upon a flameworker's fingers and wrist.  Keys between 1-2 inches are recommended.
5. Quality:  The craftsmanship of the key will be reflected in the final project.  I tend to look for keys with unique bits and bows.  Some keys have tapered shanks and added fluting.

Upon locating the right key for the project, choose a mandrel that loosely fits the key's hollow barrel shank.  A good rule of thumb is to pick a mandrel 1/16 inch smaller than the barrel opening.  Dip the mandrel in bead release and insert into the key shank.  Be sure not to trap air in the barrel (refer to tip #1 above).  Place the flame dried dipped mandrel upright in a cup of sand until the key has cooled.  It is important for the key to be on the same axis as the mandrel's axis line. 

Once the bead release is dry and the key is cool, use a paint brush to coat the key's shank with bead release.  The final step of preparation will allow the glass to adhere to the shank during flameworking. 
Note:  A heavy coating will allow the bead to later spin freely on the key.  A light coating will keep the bead trapped in place on the key without movement.  I suggest using a gray Sludge Plus, Dip & Go. 
Upon drying, the key is ready for the bead of your choice!  After creating a bead on the key, place the "key" mandrel in a 950'F kiln to anneal.

 

Once the cooled key emerges from a long soak in the kiln, clean the bead release with a mild soap and water solution.  A soft bristle brush comes in handy when cleaning the bit.

 

I hope you have enjoyed these notes from a recent class.  Feel free to email me with any questions.  Always remember, you are in charge of your own safety!

Happy Beading,
Heather

Down by the Seashore

An ocean themed, changeable cabochon can easily be place on a pendant, ring or bracelet setting.  Compatible with the Sunset Blvd and Jetage systems.  The ultra smooth back would also allow the cab to be set into a bezel or another metalworking project... because who wouldn't want a pet crab as a sidekick???  Or how about a baby sea turtle?

 

Exciting News!

 Ben Browne, a friend and fellow glass geek, is now on Etsy!  Check out his shop:

Ben Browne Art
Starting this Fall, Ben will be offering workshops at the Mesa Arts Center.  His innovative mind is truly a gift.  I expect to see great things come from his desire to push the creative limits of glass.  His passion for art extents to photography.  Feel free to convo him via Etsy for custom work and professional photography pricing.  (Photograph courtesy of Ben Browne Art)